







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Piedmont, CA: What It Takes and What It Costs
A chain link fence in Piedmont, CA typically runs $3,500 – $9,000 for a standard residential lot, and most installs wrap up in two to four working days from layout to gate hang. The number moves with linear footage, terrain, and whether the fence crosses the city’s protected tree root zones. Call (855) 471-4163 for a free on-site estimate with a written line-item quote, and we’ll tell you straight what your property needs before any crew shows up.
How We Run a Chain Link Fence Job, Stage by Stage

Most fence companies give you a single “we’ll be there Tuesday” and disappear. We break the work into five stages so you know exactly what’s happening, who’s on site, and what you have to decide before the next step starts.
Stage 1: Site walk and staking (day one, 1 – 2 hours)
We walk the property line with you, confirm the exact footage, and stake the posts. If mature oaks or redwoods sit inside the root zone, we flag it now rather than after the crew is halfway through a trench. You decide the entry point for gates and whether you want a corner post at the side yard.
Stage 2: Utility marking and 811 call (48 hours before digging)
California law requires underground utilities be marked before any excavation. We call 811 and wait for the marks. This is the stage where a surprise happens on about one in ten properties, usually an old irrigation line or a buried electrical run to a shed. You decide whether to reroute or adjust post spacing around it.
Stage 3: Demo and post setting (day two, 4 – 6 hours)
If there’s an old fence, it comes down and goes to the dumpster. Posts go in concrete footings set to depth for a 6-foot fence. On Piedmont’s hillside lots, post depth often has to run deeper on the downhill side because the clay soil moves. We set posts on day two and leave them to cure.
Stage 4: Rail, mesh, and tension (day three, 4 – 5 hours)
Top rail runs through the loop caps, the chain link mesh gets stretched tight with a come-along, and tension bars get tied off at each terminal post. You see the finished run before we hang the gates.
Stage 5: Gates, walkthrough, and cleanup (day four, 2 hours)
We hang the gate, set the latch, check the swing, and walk you through every section. Old posts, concrete chunks, and twine come off site. You decide whether to schedule a follow-up on the gate sag that sometimes shows up in the first month.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Fence Options You’ll Choose Between
Chain link is not one product. The choices you make at quote time set your price and how long the fence holds up under Piedmont’s wet winters.
- Gauge of mesh: Standard 11.5-gauge lasts roughly 12 – 15 years; 9-gauge runs about 20% more and lasts 20-plus. On a property you plan to keep, 9-gauge is the better call.
- Vinyl coating vs. bare galvanized: Coated chain link in black or green runs $2 – $4 more per linear foot but hides age far better and resists the rain-driven rust that shows up on bare steel within a few seasons.
- Height: 4-foot reads as a boundary marker, 6-foot is the residential default, 8-foot belongs on commercial lots. Each foot adds roughly $6 – $10 per linear foot installed.
- Gate type: A walk gate, a drive gate, or a double drive gate. A basic 4-foot walk gate adds $300 – $600; a 12-foot double drive gate with a heavier frame runs $900 – $1,800.
- Post schedule: Terminal posts at corners and gates need larger diameter and deeper footings than line posts. Skipping this is the number-one reason chain link sags at the corners.
- Top rail vs. top tension wire: Rail is stiffer and standard on residential work. Tension wire saves a little and looks cheaper.
The honest trade-off: coated 9-gauge with proper terminal posts is the version that still looks right a decade out. Bare 11.5-gauge is the version you replace in a dozen years. Both are legitimate choices; we price both so you can see the gap.
What Chain Link Fence Costs in Piedmont, CA

Plan on $3,500 – $9,000 for a typical residential chain link fence in Piedmont. Five things decide where your job lands in that range.
- Linear footage: Most Piedmont lots fall between 150 and 350 feet of fence line. Doubling footage roughly doubles the number.
- Terrain and slope: Hillside lots need stepped panels and deeper footings on the downhill side, which adds 10 – 20% to labor.
- Tree root zones: Posts that have to shift or hand-dig around protected root zones add time and sometimes require an arborist report.
- Existing fence removal: Tearing out an old chain link or wood fence and hauling it off adds $400 – $900.
- Gates and corners: Each gate and every corner post adds both material and setting time.
A written estimate from us covers posts, footings, concrete, mesh, rail, tension bars, gate hardware, and disposal. It does not cover arborist reports, city permit fees, or utility relocation if 811 finds something unexpected in the dig line. Those get spelled out as line items if they apply, never sprung on you mid-job.
See the difference
Before
After
Before
After
Before
AfterWhat Piedmont Specifically Does to a Chain Link Fence Job
Piedmont is a built-out city of century-old grand homes, and almost any construction project here triggers the city’s rigorous design review and tree ordinances. That means a chain link fence is rarely just a fence. It’s a permitting puzzle. The tree ordinance protects native oaks and other mature trees, and any fence line that passes through or near a protected root zone requires an arborist report and city approval before work starts. That single step reshapes fence plans more often than any other factor on Piedmont jobs.
The housing stock matters too. Craftsman, Tudor, and Mediterranean villas from the early 1900s dominate, and many have original knob-and-tube wiring and buried utility quirks that turn up during the 811 call. The hillside clay soil saturates in winter rains, so post footings need to run deeper than they would on flat Oakland ground just over the ridge. We regularly see posts on Piedmont slopes heave or loosen within two winters when footings were set at flat-lot depths.
If your chain link fence is part of a larger plan, it’s worth pairing the fence scope with the wider site work early. Homeowners often pair this with Fence Installation in Piedmont when they’re fencing the whole property, or ADU Site Prep & Utilities in Piedmont when the fence is going in around a new accessory unit and utilities will be trenched anyway. Same for Door Installation in Piedmont where a new gate needs matching hardware at the house entry. We cover all of Piedmont and the surrounding hills, and our Fence Installation team can quote the fence alone or the whole scope in one walkthrough.
Our technicians have up to 12 years of experience on fence work, and the estimates are backed by our 730-Day Done Right Promise: if the fence sags, pulls, or fails before you’d expect, we come back and make it right.
Serving Piedmont, CA – Our Local Coverage Area
We serve Piedmont and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Piedmont

Most residential jobs run two to four working days from staking to gate hang, with post curing adding one day between stages. Larger lots on steep hillside terrain can stretch to five days. Call (855) 471-4163 for a site-specific timeline.
Yes, most fence work in Piedmont requires a permit, and any fence crossing a protected tree root zone needs an arborist report and design review sign-off before installation. We handle the permit paperwork as part of the job and pull the permits under our license. Call (855) 471-4163 for a free estimate that includes permit scope.
Most of the time, yes, because the 811 utility marking call happens 48 hours before any digging, and we adjust post spacing around what turns up. Older Piedmont homes sometimes have unmarked irrigation or electrical runs to outbuildings that require a small reroute. We quote that as a line item if it applies.
Expect $3,500 – $9,000 for a standard residential install, with the exact number depending on footage, slope, and tree root zones. Vinyl-coated 9-gauge at the higher end lasts 20-plus years; bare 11.5-gauge at the lower end lasts around a dozen. Call (855) 471-4163 for an exact written quote.
Every chain link fence we install is covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If a post heaves, a gate sags, or the mesh pulls, we come back and fix it, no fine print. Call (855) 471-4163 to schedule your free estimate.
Get a Free Chain Link Fence Estimate in Piedmont
Call (855) 471-4163 for a free on-site estimate on your chain link fence in Piedmont. A real person answers around the clock, and we’ll schedule a walkthrough at your convenience. On the visit we measure the fence line, check for protected trees and buried utilities, and hand you a written line-item quote with the permit scope spelled out. The number you see is the number you pay, backed by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.












