







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Alamo, CA: What It Costs and How Long It Takes
Most chain link fence projects in Alamo, CA run $3,500 to $9,000, with the typical 150 to 250 linear-foot property line landing square in that range. A standard residential job takes 2 to 4 working days from dig to final tension, weather and county inspection permitting. Call (855) 471-4163 for a free on-site estimate with a written line-item price.
How We Build a Chain Link Fence, Stage by Stage

Here’s the actual sequence, so you know what to expect and when you’ll be asked to make a call.
Stage 1: walkthrough and layout (1 to 2 hours). We walk the property line with you, confirm corners, mark gate openings, and flag anything underground. On Alamo lots, this is also where we check well and septic setbacks with you, because a fence line that clips a leach field is a problem nobody wants to discover after the concrete sets. You decide the line and the gate placement now, not later.
Stage 2: utility locating and permit filing (2 to 10 days of lead time). Underground service alerts get called in before a single post hole is dug. Because Alamo is unincorporated, fencing permits and any grading review go through Contra Costa County rather than a city counter, and if your line runs near a slope or a creek, we confirm what the county wants before we order material. You decide whether to file the permit yourself or have us handle it.
Stage 3: demolition and post setting (day 1 to day 2). Old fence comes out, posts get set in concrete at the correct spacing and depth, and everything cures. This is the slowest part of the clock, and there’s no shortcut worth taking. Posts that aren’t plumb and properly embedded are why fences lean within a few seasons.
Stage 4: framework, mesh, and gates (day 3). Top rail, tension wire, and mesh go up, followed by gate framing and hardware. We tension the fabric, set the gate swing, and check every latch. Most jobs are structurally complete by the end of this day.
Stage 5: inspection and walkthrough (day 4). If a county inspection is required, we schedule it and meet the inspector. Then we walk the finished fence with you, hand over anything worth knowing about maintenance, and close out under our 730-Day Done Right Promise. If something’s off, we make it right. That’s the whole point of the guarantee.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Options You’ll Choose Between
A chain link fence is a simple system, but the choices inside it change both the price and how long it lasts. Here’s the honest breakdown.
- Galvanized vs. vinyl-coated mesh. Standard galvanized steel is the workhorse choice and costs the least. Vinyl-coated (green or black) adds roughly 20 to 30 percent and blends into landscaping far better. For Alamo estate lots where the fence runs along a view line or visible backyard, coated almost always looks better.
- Wire gauge. Thicker wire resists denting and sagging. Ask what gauge you’re getting before you compare two quotes, because a thin-gauge bid and a heavy-gauge bid can look identical on paper and be miles apart in durability.
- Post and rail weight. Heavier posts and rails handle wind and gate swing load better. On exposed ridge lots, this matters more than on a sheltered lot.
- Height. Standard residential height is fine for most yards; taller runs cost more in material and, depending on your lot, may trigger additional county review. We’ll tell you which applies to yours.
- Gates. Walk gates and drive gates are priced separately. A wide drive gate needs heavier framing and hardware, and that’s where a lot of budget creep actually happens. Decide gate count and width early.
- Top rail vs. tension wire. Tension wire along the top is a common, slightly less expensive option that some homeowners prefer for a cleaner look. Top rail is stiffer and holds its line better over long runs.
If the chain link is one piece of a larger yard or site project, our Fence Installation in Alamo page covers the wider scope. And because Alamo estate properties often get built out in phases, homeowners frequently pair a new fence with ADU Site Prep & Utilities in Alamo when a guest house or detached structure is part of the plan.
What a Chain Link Fence Costs in Alamo, CA

Plan on $3,500 to $9,000 for a residential chain link fence in Alamo, CA. Five things move you toward the low or high end of that range:
- Linear footage. A one-acre-plus lot means a lot of fence line. Length is the single biggest driver.
- Height and gauge. Taller runs and heavier wire cost more, and both are worth it on exposed foothill lots.
- Terrain. Sloped and stepped runs take more posts, more labor, and careful racking. Steep graded lots take the most.
- Gates. Every gate is separate labor and heavier hardware. Count them before you budget.
- Demo and site conditions. Tearing out an old fence, clearing brush, or hitting rock while digging all add labor hours.
A written estimate from us is line-itemed: footage, height, gauge, coating, gate count, demo, and permit handling if it applies. What typically isn’t included is rock excavation beyond normal digging, removing large trees or stumps, and any grading work the county might require on a sloped lot. We’ll flag those up front, not after the work starts. That’s our no-hassle upfront pricing: the number you see is the number you pay. For chain link as part of a broader project, our Fence Installation service covers the full range of materials.
See the difference
Before
After
Before
After
Before
AfterWhat Alamo Homes Specifically Do to This Job
Alamo is an unincorporated enclave of large-lot custom estates along the Diablo Valley foothills, and that shapes a fence project in ways you won’t see in nearby tract neighborhoods. Because there’s no city building department, permits and any grading review run through Contra Costa County, and hillside lots off Stone Valley Road and along the Alamo ridges can pull in fire-district review and oak tree preservation constraints. On the wooded ridge lots, steep graded driveways and well-and-septic setbacks mean the fence line itself is sometimes the hardest decision in the project. The hot, dry summers and high wildfire exposure are why we steer clients toward fire-resistant materials and keep the defensible-space footprint clear, and the winter rains on sloped lots are why erosion and sediment control on the fence line matters. The housing stock, custom and semi-custom homes on one-acre-plus lots, many built from the 1960s through the 1990s and since remodeled, means we’re usually fencing long boundary lines that bound mature landscaping and view corridors rather than a tight suburban lot. We serve all of Alamo, including ZIP 94507.
Serving Alamo, CA – Our Local Coverage Area
We serve Alamo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Chain Link Fence in Alamo

Most residential chain link fences in Alamo take 2 to 4 working days once material is on site. Add 2 to 10 days of lead time for utility locating and any county permit review, which on a sloped or creekside lot can run longer. Call (855) 471-4163 for a timeline based on your actual property line.
It depends on height and placement, and since Alamo is unincorporated, the answer comes from Contra Costa County, not a city. We’ll tell you during the walkthrough whether your job needs a permit, and we’ll handle the filing if you want. Call (855) 471-4163 to find out where your specific fence line stands.
In most cases, yes. A chain link fence is a surface-level build, so it doesn’t require moving plumbing or structure the way a larger project would. The exceptions are when a post lands directly on a well or septic component, which we identify during layout. Call (855) 471-4163 to schedule your free estimate.
A residential chain link fence in Alamo typically runs $3,500 to $9,000. Length, height, gauge, terrain, and gate count are the main variables. Call (855) 471-4163 for an exact quote. Estimates are free.
Every project we complete is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right, for two full years. That’s one of the longest workmanship guarantees in residential construction. Call (855) 471-4163 to talk through the details.
Get a Free Chain Link Fence Estimate in Alamo
Call (855) 471-4163 for a free on-site estimate on your chain link fence in Alamo, CA. A live person answers around the clock, so you’re never stuck in voicemail. We’ll walk your property line, confirm the footage and gate count, flag anything the county might want to see, and hand you a written line-item price. No obligation, no surprises, and 0% financing for 18 months is available if you need it.
Written by the team at Groundwork Construction Co.












