







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCustom & Geometric Windows in Berkeley, CA
Custom and geometric windows are made-to-measure units (arched, round, oval, trapezoid, triangular, angled, or full wall-of-glass configurations) built to fit a specific opening rather than the standard rectangles that come off a shelf. Berkeley homeowners order them for two reasons: to match the original architecture in a 1910s Craftsman or a 1920s Mediterranean on a street like Oxford or Spruce, or to open up a view wall in a mid-century ranch and stop fighting the frame. If your opening isn’t square, isn’t level, or isn’t a standard size, a stock window will either leave a gap you’ll have to frame around or force a remodel you didn’t plan. We measure, template, order, and install to the opening you actually have.
Groundwork Construction Co. of Berkeley installs these as part of our Windows & Doors work, with brand partners including Andersen and Marvin for the glass and frame, and our technicians bring up to 12 years of experience on shaped and oversized units. Every installation is covered by our 730-Day Done Right Promise. Call (855) 471-4163 and a live person will pick up, any hour, to start a measurement.
Key Takeaways
- Geometric and custom windows are built to a template, not to a stock size, so the lead time is longer than a standard replacement.
- Berkeley’s older housing stock (pre-1940 Craftsman and Mediterranean, plus mid-century hillside homes) is where most shaped-window work happens.
- Pricing in Berkeley typically runs higher than flat-rate stock replacement because of templating, custom glazing, and trim carpentry.
- We quote upfront, and the number you see is the number you pay. No-hassle upfront pricing on every job.

When You Need Custom & Geometric Windows
Most people don’t wake up wanting a trapezoid window. They want the window that fits the wall they have, or the look the house was designed for. Here’s what usually brings a Berkeley homeowner to us.
- The original window is a shape you can’t buy off the shelf. Walk through the Elmwood or Claremont flats and you’ll find arched transoms and half-round windows over front doors. When one fails, you can’t drop in a rectangle without the house looking wrong from the street.
- You’re adding a gable, dormer, or stairwell landing. Angled walls need angled glass. A triangular or trapezoid unit in a stairwell lets in daylight where a rectangle leaves a dead corner.
- You have a view wall on a Berkeley hills lot. Homes up in the Berkeley Hills often face the bay on a sloped lot, and the wall that faces the view is rarely a clean rectangle. Custom units let you frame the view without a mullion running through it.
- You’re matching a historic facade through a design review. Berkeley has strong historic character in its older neighborhoods, and shaped windows are part of that. A custom unit that matches the original profile is often the simplest path through a review.
- A previous owner patched a shaped opening with a rectangle and framing. We see this a lot: a round window boarded over and squared off decades ago. Restoring the original opening is custom work, and it’s our work.
- Fogged or failed glass in a shaped unit. A shaped window with a failed seal can’t be swapped for a stock sash. It needs a custom re-glaze or a full unit replacement templated to the opening.
Our Custom & Geometric Windows Process
Custom windows live or die on the measurement. A stock window that’s a quarter-inch off is a shim job. A custom window that’s a quarter-inch off is a rebuild. So we over-measure, template, and confirm before anything goes to the factory.
- On-site visit and template. We come out, measure the rough opening at multiple points, check for out-of-square walls (common in Berkeley’s older homes after a century of settling), and build a physical template for the shape. On arched and round units, the template is what the factory builds from.
- Material and glazing selection. We walk you through frame options (wood, wood-clad, fiberglass, vinyl) and glass packages, and we bring the brand catalog so you can see the profiles, not just a spec sheet. For decorative or leaded glass on historic homes, we work with craft glaziers. We also handle door-adjacent shapes through partners like Therma-Tru when a sidelight or transom ties into an entry.
- Upfront written quote. You get a line-item number before anything is ordered. The number you see is the number you pay, and there are no change-order surprises buried in the fine print. Projects over $10,000 get $1,000 off, and we offer 0% financing for 18 months.
- Order and factory confirmation. Custom units take longer than stock. We confirm the shop drawing, check the template against it, and give you a realistic delivery window instead of a fantasy date.
- Installation by background-checked, uniformed technicians. We remove the old unit, prep and flash the opening, set the new one, insulate, and trim it out. Shaped units need careful flashing at the curve, and that’s where a lot of installers cut corners. We don’t.
- Final walkthrough and the 730-Day Done Right Promise. We walk the job with you, check operation, seals, and finish, and put our workmanship guarantee in writing for 730 days. If it’s not done right, we make it right.

Custom & Geometric Windows Pricing in Berkeley
Custom and geometric window pricing in Berkeley is driven by shape, size, glazing, and how much trim carpentry the opening needs. A shaped unit costs more than a rectangle of the same area because the glass is cut to a template and the frame is built to order. Below are realistic ranges for the Berkeley market; your exact quote depends on the opening, so we measure first and quote in writing.
| Work | Typical Range (Berkeley) |
|---|---|
| Single custom rectangle, standard size, installed | $900 – $1,600 |
| Arched or half-round unit, installed | $1,800 – $3,500 |
| Round or oval unit, installed | $2,000 – $3,800 |
| Trapezoid or triangular gable unit, installed | $1,700 – $3,200 |
| Oversized view-wall unit or mulled assembly | $3,500 – $9,000+ |
| Decorative or leaded glass upgrade | Add $400 – $1,800 |
| Reframing an opening that was squared off | $600 – $2,000 |
What moves the number: the shape (round and arched units take the most factory work), the glazing (low-E, tempered, laminated, or decorative), the frame material, the size, and whether the rough opening needs repair before a new unit goes in. On older Berkeley homes, wall framing behind the old window is often the wild card; we open it up and tell you what we find before we proceed. The estimate and design consult are free, so the first step costs you nothing.
If your job crosses $10,000, our $1,000 off promotion applies, and 0% financing for 18 months spreads the rest. Call (855) 471-4163 for an exact quote.
How Long Does a Custom Window Take in Berkeley?
Plan on six to twelve weeks from order to installation for most custom and geometric units, with shaped and oversized pieces at the longer end. Stock windows install in days; a templated unit is built to your opening, so the factory lead time is the real driver. In Berkeley, older homes sometimes add a week or two if the rough opening needs reframing once we open the wall. We give you a dated schedule at order and keep you posted on any change.
Do You Need a Permit for Custom Windows in Berkeley?
Like-for-like replacement of a window in the same opening generally doesn’t trigger a permit, but changing the size of an opening, cutting a new opening, or altering the exterior profile on a home in a historic district can. Berkeley’s older neighborhoods have design review considerations, and we check that before we order. We handle the permitting conversation with you during the site visit so you know where you stand before any money is spent on custom glass.
FAQs – Custom & Geometric Windows
Can you match the shape of my original window?
Yes. We template the existing opening and order a unit built to that profile, which is how we match arched, round, and half-round windows common on older Berkeley homes. If the original opening was squared off by a previous owner, we can rebuild it to the original shape and template from there.
What’s the difference between a custom window and a geometric window?
A custom window is any unit built to a non-standard size; a geometric window is a shaped unit (arched, round, oval, trapezoid, triangular, or angled). Most geometric windows are custom, but not all custom windows are geometric. Both are built to your opening rather than pulled from a stock list, and both need templating before they go to the factory.
Do custom and geometric windows cost more than standard replacement windows in Berkeley?
Yes, typically 40 – 90% more than a stock unit of similar area, because the glass is cut to a template and the frame is built to order. A standard replacement unit in Berkeley runs roughly $500 – $1,100 installed; a shaped unit runs $1,800 – $3,800 depending on shape and glazing. We quote upfront, and the free estimate tells you exactly where your opening lands.
Can you install a custom window in a Berkeley hillside home without a crane?
Usually yes. Most shaped units fit through a standard door or window, and we hand-carry oversized assemblies where access is tight. Homes up in the Berkeley Hills on narrow, steep streets sometimes need a crane for a large view-wall unit, and we tell you upfront if that’s the case and what it costs. Call (855) 471-4163 to talk through access on your lot.
Ready to measure? Call (855) 471-4163 for a free estimate and design consult, and a live person will answer. If you’d like to see how windows and doors fit into your wider remodel, our home page lays out every service line, and the Berkeley service area page shows the neighborhoods we work in. Building the view wall, the gable window, or the restore to the original profile starts with a template, and that starts with one call.
Written by the team at Groundwork Construction Co. of Berkeley, serving Berkeley.


