







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterFence Gates in Berkeley, CA
A fence gate in Berkeley typically costs $350 to $1,200 installed for a standard walk gate, and $1,400 to $3,500 for a wide driveway gate with heavier framing and hardware. The price swings mostly on width, material, and how the gate hangs off your existing posts. We install and repair wood, metal, and composite gates for Berkeley homeowners who need a side-yard entrance, a driveway barrier, or a gate that finally latches the way it should.
Gates take more abuse than any other part of a fence. Every swing pulls on the hinges, the post, and the latch, and on a hillside lot the whole assembly fights gravity. That’s why a gate that looked fine on install day can sag within a season if it wasn’t framed and hung correctly. Groundwork Construction Co. of Berkeley builds gates as a dedicated piece of work, not an afterthought tacked onto a fence run. If you’re replacing fencing too, start with our Fence Installation in Berkeley page; if it’s just the gate, you’re in the right spot.
Call (855) 471-4163 and a live person picks up, day or night. No voicemail, no waiting for a callback Monday morning.
Key Takeaways
- Standard walk gates run roughly $350 – $1,200 installed; driveway gates run $1,400 – $3,500 depending on span and material.
- Berkeley’s hillside grades and clay soils put unusual stress on gate posts, so bracing and footing depth matter more here than on flat ground.
- Every gate we install is covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction.
- All technicians are background-checked, arrive in uniform, and bring up to 12 years of experience.

When You Need Fence Gates
Most Berkeley homeowners call us about a gate for one of a handful of reasons. Here are the ones we hear most.
- The gate drags or won’t latch. On Berkeley’s sloped lots, a gate that cleared the ground in spring can catch on the concrete by summer as the soil shifts. A dragging gate is usually a post-and-hinge problem, not a gate problem, and it’s worth fixing before it tears the hinges loose.
- You’re adding a side-yard entrance. The older homes around the Elmwood and Thousand Oaks neighborhoods often have narrow side yards. A properly sized walk gate lets you move bikes, garden carts, and trash bins in and out without wrestling a full fence panel.
- You want a driveway barrier. A wide swing or slide gate across a driveway adds privacy and keeps kids and pets contained. Driveway gates in Berkeley need heavier posts and hardware than most people expect, especially where the drive has any grade.
- Your existing gate is a rusted or warped mess. Wood gates rot at the bottom rail where moisture lingers, and steel gates rust at the weld joints. We replace the gate while reusing sound posts when we can, which keeps the cost down.
- You need a pool or safety gate. A self-closing, self-latching gate is the standard for pool enclosures. We set the hardware so it swings closed on its own every time.
- You’re matching a new gate to existing fencing. When the fence is in good shape but the gate was never built to match, we build a gate that lines up with your rails, pickets, and finish so it doesn’t look bolted on.
Our Fence Gates Process
- On-site measure and layout. We check the opening width, the grade, and the soil, and confirm which way the gate should swing. On Berkeley hillside lots we look hard at the slope because a gate that swings uphill needs different framing than one on flat ground.
- Upfront pricing before any work starts. You get a written number for the gate, the hardware, and any post work. The number you see is the number you pay, with no surprise line items after the crew shows up.
- Post and footing prep. A gate is only as solid as the post it hangs from. We set or reinforce posts to the right depth and brace them so the weight of the gate doesn’t pull them out of plumb. Berkeley’s expansive clay soils punish shallow footings, so we don’t cut that corner.
- Build and hang the gate. We frame the gate with proper diagonal bracing, hang it on hardware rated for its weight, and set the latch and hinges so it swings clean and closes firmly. For entry gates we can finish with a decorative panel from a name like Barrette so the gate matches the look of the rest of the fence.
- Final swing test and walkthrough. We open and close it, check the latch, confirm the clearance, and walk you through it before we call it done. If anything’s off, we adjust it on the spot.
When the gate is part of a larger fencing job, we fold it into a single plan. You can see the full scope of what we handle on our Fence Installation page.

Fence Gates Pricing in Berkeley
Gate pricing depends on width, material, hardware, and whether we’re reusing existing posts or setting new ones. Here’s a realistic range for the Berkeley market so you can budget before you call.
| Gate type | Typical installed range | What drives the price |
|---|---|---|
| Standard wood walk gate (3 – 4 ft) | $350 – $750 | Picket style, latch, hinge type, post condition |
| Premium wood or composite walk gate | $600 – $1,200 | Material grade, decorative top, self-closing hardware |
| Metal walk gate | $550 – $1,100 | Steel gauge, powder coat finish, weld detail |
| Single swing driveway gate | $1,400 – $2,600 | Span width, heavy posts, bracing, hardware rating |
| Double swing driveway gate | $2,200 – $3,500 | Total opening, post count, matching hardware |
| Gate hardware and rehang (existing gate) | $150 – $450 | Hinge replacement, latch, post reinforcement |
What moves the number most: a wider gate needs heavier framing and bigger posts, and that’s the single biggest cost driver. Material matters too: composite and premium woods cost more up front but hold up better in Berkeley’s damp winters. On a sloped lot, extra post depth and bracing add cost but prevent the sag that ruins cheap gate jobs. If you want the gate to match a larger fencing project, that pricing lives on our Fence Installation page.
We quote everything upfront, and we back every gate with the 730-Day Done Right Promise. If it’s not done right, we make it right. Ask about our $1,000 off projects over $10,000 and 0% financing for 18 months when the gate is part of a bigger fencing job. Estimates are free and there’s no pressure.
Choose the Right Gate Material for Berkeley Weather
Berkeley sits in a marine climate: cool, damp mornings, fog that rolls in off the bay, and rain that lingers on wood and steel. That climate treats gate materials very differently, and picking the wrong one means replacing it sooner than you’d like.
Wood is the classic choice and matches most Berkeley fences. Cedar and redwood handle moisture better than pine, but even good wood needs a sealer and a check on the bottom rail each year, since that’s where rot starts. Composite shrugs off moisture and won’t rot, which suits the fog belt well, though it costs more up front. Metal gates, whether steel or aluminum, hold up for decades if the finish is sound, but any breach in the coating becomes a rust point near the coast. For entry gates we can pair a sturdy frame with a glass or decorative panel from a brand like Mr-Glass or ViewLux to get light through without giving up privacy. Whichever material you choose, we match the hardware and finish so the gate looks like it belongs.
Gate Hardware and Hinges: Small Parts, Big Difference
The gate itself is only half the story. Hinges, latches, and closers take the daily wear, and cheap hardware is the reason so many gates sag and stick within a year. We spec hardware for the gate’s actual weight, not whatever’s on the shelf. For a heavy driveway gate that means heavy-duty hinges and a proper brace; for a pool gate it means a self-closing, self-latching hinge that passes safety expectations. We also check that the latch lines up cleanly with the post so you’re not lifting the gate every time you close it. Little details like these are why a gate we hang still swings true long after install day.
Repair or Replace Your Gate?
Repair usually wins when the posts are solid and the problem is hinges, a latch, or a sagging gate that just needs rehanging and bracing. A rehang with new hardware runs $150 – $450, far less than a new gate. Replacement makes more sense when the wood has rotted through the bottom rail, the frame is warped beyond saving, or the posts themselves are pulling out of the ground. We’ll tell you straight which one you’re looking at. There’s no upselling a whole new gate when a hardware swap will do the job.
Why Berkeley Homeowners Call Groundwork Construction Co.
Gates are detail work, and detail work is where a lot of contractors cut corners. We don’t. Every gate comes with the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction: if it’s not done right, we make it right. Our technicians have up to 12 years of experience, they’re background-checked, and they arrive in uniform on every job. Calls are answered by a live person 24/7, so you’re never stuck in a voicemail black hole when a gate fails and you need someone out. And our pricing is upfront: the number you see is the number you pay. When the gate is part of a larger project, we can bring in the same level of care across other trades, from a full fencing run to front-entry doors from Therma-Tru that frame the walkway your new gate opens onto. From foundation to finish line, it’s one contractor to hold accountable.
Areas We Serve Around Berkeley
We work throughout Berkeley and the surrounding East Bay, including the Elmwood, Thousand Oaks, North Berkeley, and Claremont neighborhoods, plus nearby areas like Fence Installation in Berkeley and the communities just over the hills. Hillside properties, flat lots, and everything between: we’ve hung gates on all of them, and we know how each grade and soil type affects the way a gate sits.
FAQs – Fence Gates
How much does a fence gate cost in Berkeley?
A standard walk gate in Berkeley typically costs $350 to $1,200 installed, and a driveway gate runs $1,400 to $3,500 depending on width, material, and hardware. Rehanging an existing gate with new hardware is usually $150 to $450. Call (855) 471-4163 for an exact quote; estimates are free.
Can you fix a gate that sags or won’t latch?
Yes, and it’s often a same-visit fix. A sagging or sticking gate usually comes down to worn hinges or a post that’s shifted, both of which we can correct by rehanging the gate and reinforcing the post. Call (855) 471-4163 and we’ll take a look.
How long does it take to install a fence gate?
A standard walk gate is often installed in a single visit, while a wide driveway gate or one that needs new posts set may take a bit longer because of footing work. We confirm the timing when we measure. Call (855) 471-4163 to schedule.
Is it cheaper to repair or replace a gate?
Repair is cheaper when the posts are solid and only the hardware or alignment is off, which usually runs a few hundred dollars. Replacement is the better call when the wood has rotted or the frame is warped. We’ll tell you which one fits your gate and won’t push a replacement you don’t need. Call (855) 471-4163 for a free estimate.
Get Your Berkeley Fence Gate Built Right
A gate that swings clean, latches firmly, and still lines up a year from now is a small thing that makes a yard work better every single day. From first call to final swing test, Groundwork Construction Co. of Berkeley builds gates backed in writing and priced upfront, with a live person on the line whenever you need us. Call (855) 471-4163 for a free project estimate and design consult, and let’s get your gate hung right.
Written by the team at Groundwork Construction Co. of Berkeley, serving Berkeley.


