







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow to Measure a Window for Replacement in Berkeley, CA
Measure the window opening in three places for width (top, middle, bottom) and three for height (left, center, right), then order to the smallest of each set. That’s the short answer. In Berkeley’s pre-1940 homes, those six numbers almost never match. A Craftsman frame that reads perfectly square to the eye routinely shows 1/4″ to 3/4″ of variation once you put a tape on it, because the frame has racked, settled, or been patched over a century. Order the wrong dimension and the new unit binds, leaks, or won’t open. If you want a trained eye on it before anything is ordered, our Windows & Doors team measures for free – call (855) 471-4163 and we’ll book a visit.

Why a Berkeley Frame Looks Square and Almost Never Is
Berkeley’s housing stock is overwhelmingly early-1900s wood-frame construction: Craftsman bungalows, Victorians, brown-shingle “Berkeley boxes.” Many sit on unreinforced brick foundations, and in the Elmwood and North Berkeley flatlands it’s common to find original redwood framing that’s still sound but well out of plumb after a hundred years of soil movement. That settlement is why a frame can pass the eyeball test and fail the tape. The glass is the giveaway. Look at the reveals – the thin gap between the sash and the frame – and if one side is tight and the other is wide, the opening has shifted.
This is also why the online measuring guides fall short here. They assume a plumb, square, undisturbed opening. Berkeley windows are rarely any of those things. The window’s interior trim might have been reworked in the 1970s, the sill might have a 1/2″ slope, and the stop bead may not match the opposite side. None of that shows up in a generic how-to.
The Three-Point Measurement Method
Before you measure anything, decide which kind of replacement you’re doing, because the two need different numbers.
- Full-frame replacement: You’re pulling the entire unit, frame and all, and installing a new one. You need the rough opening – the framing dimensions behind the finished trim.
- Insert (pocket) replacement: You’re keeping the existing frame and sliding a new sash into it. You need the frame opening – the inside dimensions of the existing frame pocket, measured to the surface where the new unit will seat.
Now measure. Width at the top of the opening, at the middle, and at the bottom. Height at the left, center, and right. Write all six down. On a modern, straight opening the six numbers land within 1/8″ of each other. On a Berkeley pre-war frame, expect a 1/4″ to 3/4″ spread. Order to the smallest number in each direction, then plan for the gap to be shimmed, insulated, and flashed. Ordering to the largest number means the unit will not fit the narrowest part of the opening.
If you’re going with a custom unit – we install Andersen and Marvin windows built to exact spec – those six digits are the entire order. There’s no adjusting a factory-cut frame on the job site. Get them right the first time.

The Out-of-Square Check: Your Diagonals
Take two diagonal measurements, corner to corner. On a plumb opening, the two diagonals match within 1/4″. If they don’t – and on Berkeley frames that’s common – the window assembly is out of square, and no factory-ordered window will fix that. A binding sash on an out-of-square frame means the opening itself needs correction: re-shimming the existing frame, sistering the jack studs, or in a badly settled case, structural work before a new window goes in.
This check is the difference between a clean install and a callback six months later. It’s also why we recommend booking a site visit rather than ordering from a tape measure alone. The measurement and the square check together tell you what size window you actually need and whether the opening is ready for it.
Watch the Stop Bead: Where Berkeley Homeowners Get Burned
Many original Craftsman windows here have thick redwood stop beads – the raised strip that holds the sash in the frame pocket. That bead eats into the daylight opening. Homeowners measuring to the inside of the glass, rather than to the frame pocket, end up with a number that’s 1/2″ or more too small. The custom window arrives undersized, and now you’re waiting 4 to 6 weeks for a reorder. Consistent quality control matters more than speed here, so our team measures to the frame pocket – not the glass – every time.
An insert replacement often fails in a heavily settled home for the same reason: the existing frame is out of square, so the new sash won’t seat cleanly, no matter how carefully you measured. When the frame is that far off, a full-frame replacement usually makes more sense than fighting a bad pocket.
What Window Replacement Costs in Berkeley
Pricing hinges on the size, material, and number of units going in. Here are the ranges we work from in Berkeley:
| Work type | Typical range |
|---|---|
| Window replacement (per whole project) | $4,500-$15,000 |
| Impact window installation | $8,000-$25,000 |
Every window project we quote falls under the 730-Day Done Right Promise. If we got the measurement or the install wrong, we make it right – that’s the point of a workmanship guarantee that runs two years, not two months. Upfront pricing means the number we quote is the number you pay, and 0% financing for 18 months plus $1,000 off projects over $10,000 makes a full window swap easier to plan around. A custom Andersen or Marvin measurement error means a 4-to-6-week reorder, so our measurement step is free and done before any deposit changes hands.
When to Call a Professional
If your frame is out of square by more than 1/4″, or your six measurements vary by more than 3/4″, it’s time to bring in a pro. Get it wrong and you’re not just out the cost of a window – you’re into a reorder, a delay, and possibly a structural correction on top of it. Our background-checked technicians bring up to 12 years of experience to a measurement, and Groundwork Construction Co. of Berkeley offers free estimates with a design consult so the sizing is handled before anything is ordered. Reach our team through our home page or the Berkeley service area page.
FAQs
Measure to the frame pocket, not the glass. Measuring to the glass undershoots on Berkeley’s thick Craftsman stop beads and can leave you with an undersized custom unit and a 4-to-6-week reorder. If you’re doing a full-frame swap, measure the rough opening behind the trim instead. Call (855) 471-4163 for a free measurement if you’re unsure which applies to your window.
A 1/4″ or greater difference between the two diagonals means the opening is out of square and the frame needs correction before a new window is ordered. On Berkeley’s settled pre-war frames this is common, and installing a new unit into an out-of-square pocket leads to binding or leaks. Call (855) 471-4163 and we’ll assess whether the frame can be shimmed or needs structural correction.
Within 1/8″ is normal on a straight, modern opening. A 1/4″ to 3/4″ spread is typical in pre-1940 Berkeley homes and means the frame has racked or settled. Order to the smallest number in each direction and plan for shimming. If the spread is over 3/4″, call (855) 471-4163 before ordering – the opening may need work first.
Yes. We measure for free, then order custom Andersen or Marvin units built to spec. Because a measurement error on a custom window triggers a 4-to-6-week reorder, our measurement step happens before any deposit. Estimates are free – call (855) 471-4163 to book a visit.
If you’d rather have it looked at, Groundwork Construction Co. of Berkeley offers a no-pressure assessment in Berkeley – call (855) 471-4163. Live people answer around the clock, the measurement is free, and you’ll get real numbers before you order a single window.
Written by the team at Groundwork Construction Co. of Berkeley, serving Berkeley, CA.


