







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What a Chain Link Fence in Moraga Costs and How Long It Takes
Chain Link Fence in Moraga typically runs $3,500 – $9,000 for a standard residential run, and most jobs are finished in one to three days on site. That range covers posts, framework, mesh, concrete footings, and cleanup. Where a property line runs across a slope, through oak canopy, or needs a hillside permit, the timeline stretches to roughly a week once the town signs off. Call (855) 471-4163 for a free on-site estimate and a written line-item quote.
How We Build a Chain Link Fence in Moraga, Start to Finish

Moraga lots are big, and that shapes how the work gets sequenced. Here’s the real order of events, and what you decide at each step.
Stage 1 – Site walk and line layout (about an hour)
We walk the property line with you, check setbacks against your lot, and flag anything that needs a call before we dig: an oak inside the protected canopy zone, a hidden irrigation main, an old footing. You confirm the layout and gate locations here. Getting this right on day one prevents the one thing that wrecks a fence schedule, which is finding out on day two that the line has to move.
Stage 2 – Permit check and utility marking (1 – 5 business days)
Whether you need a permit depends on height, location, and whether the fence sits in a slope or tree-protection area. Moraga’s Planning Department handles hillside development permits, and protected native oaks can require an arborist report before anyone trenches near them. We handle the filing and the utility locate so the digging window is clear.
Stage 3 – Demolition and prep (half a day)
Old fencing comes out, brush and roots get cleared along the line, and we grade the footing path on sloped sections so posts sit plumb rather than stepped awkwardly down the hill. There’s no plumbing or structural work involved in a chain link run, which is one reason this job stays affordable.
Stage 4 – Posts, footings, framework (day one, most jobs)
Line posts get set in concrete on the spacing the run requires, terminals and corners get bracing, and top rail and tension bands go on once the footings take their initial set. On a longer acreage run, this is the stage that runs into a second day.
Stage 5 – Mesh, gates, tension, walkthrough (day two)
Mesh gets stretched and tied, gates get hung and swing-tested, and we walk the whole line with you before we leave. Touch-ups and any gate adjustment happen before we call it done. The numbers you see on the estimate are the numbers you pay.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Fence Options Moraga Homeowners Actually Choose Between
Chain link is a workhorse fence, but not all of it is the same fence. Here’s what the spec decisions look like, with the honest trade-off on each.
- Gauge of mesh (11 vs 9 vs 6): 11-gauge is the light residential standard and the cheapest per foot. 9-gauge holds up considerably better against dogs, deer, and the push of a mower along the bottom rail. 6-gauge is commercial-grade and rarely necessary for a backyard. On a Moraga lot where the fence line sees heavy brush or animal pressure, 9-gauge usually pays for itself.
- Coating (galvanized vs vinyl-coated): Galvanized lasts well in this climate and costs less. Vinyl-coated runs a bit higher but reads more finished and blends against oak foliage better, which matters where the fence is visible from the house or a neighbor’s deck.
- Height (4, 5, 6 feet): 4-foot reads open and suits a front boundary. 6-foot is the common choice for the back line. Higher than 6 feet can push the job into permit territory, so it’s worth settling early.
- Post and rail weight: Heavier top rail and larger-diameter posts reduce sag over long spans, which is exactly the situation on half-acre-plus runs. A longer line with light framework will droop within a few years.
- Gates: Walk gates are standard; drive gates in a chain link run need heavier posts and a proper latch. Decide gate count and swing direction in Stage 1.
Brand-name metal isn’t the factor here that it is in roofing, so we don’t push a label at you. We do source from established manufacturers, and the material grade is where the money goes. If your broader plans touch a bigger project, this often pairs naturally with our Fence Installation service or a full Fence Installation in Moraga plan.
What Chain Link Fence Costs in Moraga, CA

Most residential chain link fencing in Moraga lands between $3,500 and $9,000. That’s the working range, and here’s what actually moves a job from the low end to the high end.
| Factor | Effect on price |
|---|---|
| Linear footage | The single biggest driver. Front-yard runs sit near the low end; acreage perimeter lines sit high. |
| Terrain and slope | Stepped posts on a hillside run cost more than a flat backyard line, and expansive clay can add footing depth. |
| Material grade | 11-gauge galvanized is the cheapest; 9-gauge and vinyl coating push up the total. |
| Gates and hardware | Drive gates and multiple walk gates add line-item cost. |
| Permit and tree review | Hillside permits or an arborist report near protected oaks add scope before the fence begins. |
A written estimate from us spells out footage, gauge, coating, post spacing, gate count, and whether permit costs are included. What it typically does not include: arborist reports if the town requires one, and any unexpected demolition of buried footings or old concrete. We flag those up front rather than surprise you later. Call (855) 471-4163 for a line-item quote, and estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Moraga Homes and Hillsides Do to a Chain Link Job
Moraga’s terrain is the story here. On the slopes off Moraga Road and out in the Sanders Ranch area, crews routinely hit expansive clay and old fill. That clay swells and shrinks with the seasonal moisture swing, and it’s exactly why post footings on a Moraga chain link run need to go deep enough to hold below the active soil layer, not just skim the surface. A post set too shallow on clay will lean after the first big winter storm. The town’s shelter-meets-heat climate is a factor too: summers here run hotter than the neighboring Oakland and Berkeley hills, with strong day-to-night swings and occasional winter frost, and that cycle works on both soil and coatings. And because Moraga lots are dominated by 1960s – 1980s custom ranches and split-levels on half-acre-plus parcels with mature oak canopy, the tree-protection requirements matter. Any trenching near a protected native oak may need an arborist report and tree-protection plan before permits issue. We work across the 94556, 94570, and 94575 ZIPs, and we plan the layout around the trees rather than through them.
Serving Moraga, CA – Our Local Coverage Area
We serve Moraga and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Moraga

Most residential jobs finish in one to three days on site; a longer acreage run or a sloped line takes closer to a week. Add permit time. Call (855) 471-4163 to get a timeline for your property.
It depends on height, location, and whether the line crosses a slope or protected oak zone. A 4-foot run in a flat backyard often needs none; a 6-foot line near an oak can trigger a tree-protection review. We’ll sort out which applies during the site walk. Call (855) 471-4163 to check your specific lot.
Almost always, yes. Chain link sits on posts and concrete footings only, so it doesn’t disturb plumbing, electrical, or the house itself. The one thing we do watch is buried irrigation lines and sprinkler mains, which we locate before digging. Call (855) 471-4163 if you’re unsure what’s buried on your line.
Most jobs land between $3,500 and $9,000, depending on footage, gauge, slope, and gate count. A short front run prices low; a full acreage perimeter with drive gates prices high. Call (855) 471-4163 for a written line-item quote; estimates are free.
Every job we do is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential space. If something isn’t right, we make it right. Call (855) 471-4163 to talk through coverage on your project.
Get a Free Chain Link Fence Estimate in Moraga
If you’re planning a chain link fence in Moraga, the next step is a free on-site estimate. Call (855) 471-4163 and a live person answers around the clock. We’ll ask about footage, terrain, and gate needs, then walk the property to give you a written, upfront number with no surprises. And if the property work is bigger, homeowners often pair this with ADU Site Prep & Utilities in Moraga or Door Installation in Moraga. We cover Moraga and the surrounding towns of Alamo, Walnut Creek, Lafayette, and Ashland.
Written by the team at Groundwork Construction Co.












