







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Martinez, CA: What the Job Actually Costs
Cabinets & countertops in Martinez, CA run $14,000 to $45,000 for a full tear-out and replacement, with most downtown and hillside kitchens landing between $18,000 and $28,000. The work takes two to five weeks from demo to final caulk, because the counter template can’t be measured until the cabinets are set and level. That gap is the part most homeowners don’t plan for. Call (855) 471-4163 to schedule a free on-site estimate.
How the Work Moves From Demo to Final Caulk

Cabinet and countertop replacement looks like one job from the outside. It’s really four trades taking turns in a small room, and the order isn’t negotiable. Here’s the sequence we run, with the realistic clock on each stage.
Day 1-2: Protection, demo, and what’s behind the old boxes
We mask the adjacent rooms, pull the old doors and drawer fronts, and take out the base and wall cabinets. On Martinez homes this is where surprises surface: old drywall, a missing stud for a wall cabinet, or a 1950s junction box that won’t pass an inspection. We photograph everything before it gets covered back up. You decide nothing at this stage except which appliances stay and which get disconnected.
Day 2-3: Leveling and layout
A kitchen floor is rarely flat, and older Martinez houses are the worst offenders. We shim and scribe the base run until it’s level within an eighth of an inch over eight feet, because a wavy base telegraphs straight up into the counter seam. This is where you lock in the final cabinet layout: blind corners, filler strips, whether the range sits centered on its run.
Day 4-8: Setting cabinets and building the island
Boxes go in, screwed to studs and to each other, then doors, drawers, and hardware. Islands get built and fastened to the floor. If you’re going with a brand like KraftMaid, lead time has to be booked weeks ahead, so this stage is where schedule slips show up. You confirm hardware placement and any pull-out or lazy-Susan you added.
Day 8-9: Template
Nobody measures a counter from a drawing. The fabricator sends a templater with a digital arm to trace the actual installed cabinets, sink cutout, and wall scribes. Getting this wrong means a slab that doesn’t fit and a two-week reset. You sign off on the template, edge profile, and seam locations here, and that’s the last chance to change your mind on overhang.
Day 12-16: Install, plumbing, and punch list
The fabricated slab arrives, gets set, and seams are bonded and polished. The plumber reconnects the sink and disposal, we caulk the backsplash line, reinstall appliances, and walk the room with you. Any door that rubs or drawer that catches gets adjusted before we leave. Total window: two to five weeks depending on fabrication queue.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
Most of the budget decision happens in a single afternoon at the design table. Here’s what each choice actually trades off.
- Stock vs. semi-custom cabinets: Stock sizes cost less and arrive faster, but they force the layout to fit the boxes instead of the room. Semi-custom lets you pick widths in two-inch increments, which matters in a tight downtown galley where a filler strip eats your counter. Plan on stock at the bottom of the range, semi-custom in the middle.
- Plywood vs. particleboard boxes: Plywood holds screws after the second or third remodel and tolerates moisture better. Particleboard is cheaper and fine in a dry kitchen, but a leaky sink base will swell it. Worth the upgrade where the sink lives.
- Quartz vs. granite vs. laminate: Quartz is the current default, non-porous, and needs no sealing. Granite costs comparable money but demands resealing every year or so. Laminate still works for a tight budget or a rental and has gotten much better looking.
- Slab thickness and edge profile: A 3cm slab with a simple eased edge costs less than a mitered 6cm edge, which involves more fabrication hours and more waste from the slab.
- Sink and faucet timing: An undermount sink has to be on site before template. A farmhouse apron sink changes the cabinet run and adds fabrication cost. Choose early or the schedule stalls.
What Cabinets & Countertops Costs in Martinez, CA

Here’s how the Martinez market breaks down for the pieces of this job, based on what we see on written estimates in 94553:
- Cabinet installation: $4,000-$13,000, depending on box count, stock vs. semi-custom, and whether the island is included.
- Countertop installation: $2,000-$6,500, driven by slab material and square footage.
- Kitchen island installation: $3,000-$10,000, factoring in electrical for outlets and seating overhang.
- Backsplash installation: $800-$2,500.
- Full cabinets & countertops scope, Martinez: $14,000-$45,000.
Four things push a job toward the top of that range: size of the room and number of cabinets; the condition behind the old cabinets (water damage, missing studs, outdated wiring that has to be corrected); relocating the sink or range, which drags in plumbing and electrical and sometimes a permit; and material grade, since a semi-custom KraftMaid run with quartz sits well above a stock box with laminate.
A written line-item estimate covers demo, haul-off, cabinet supply and install, template, slab fabrication, sink reconnection, and caulk. It typically doesn’t cover appliance purchase, electrical or plumbing beyond reconnection, or wall repair after backsplash removal. Fixed pricing, no change orders, and the 730-Day Done Right Promise are stated in writing so you know exactly what’s covered.
See the difference
Before
After
Before
After
Before
AfterWhat Martinez Homes Specifically Do to This Job
Martinez spreads from the flat downtown grid off Main Street up into the hillside blocks toward Alhambra Valley, and the two halves of town produce very different cabinet jobs. In the older downtown and Alhambra-adjacent homes, the problems are pre-war framing, plaster walls, and out-of-square corners that turn a simple box install into custom scribing. Up the hillside streets, the winter rain and slope drainage issues we deal with every wet season mean water intrusion is worth checking behind the sink wall before we close it up. Salt air and wind off the Carquinez Strait also shorten the life of exterior-rated hardware, so we spec finishes that hold up.
Permits depend on scope. Swapping cabinets of the same size in the same spot generally doesn’t need one. Moving a sink, a range, or a gas line does, and electrical work needs to meet current code. Martinez has a mix of century-old structures and newer infill, so we check the age before we assume what’s behind a wall. If your project grows into a wider scope, it’s part of our Kitchen Remodeling in Martinez work, and homeowners often pair cabinet replacement with a Garage Conversion ADU in Martinez when they’re adding living space at the same time. We cover the whole of Martinez, and if a build grows to new square footage, a New Detached ADU in Martinez is a scope we handle too. Our kitchen remodeling service covers the full project when cabinets are one piece of it.
Serving Martinez, CA – Our Local Coverage Area
We serve Martinez and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Martinez

Two to five weeks, with most of that gap being the counter fabrication queue after cabinets are set. The install itself is quick; the waiting is between template and slab delivery.
Not for a straight cabinet and counter swap where plumbing, gas, and electrical stay put. Moving a sink, range, or gas line, or adding circuits for an island, does trigger a permit and inspection.
Yes, and that’s the most common path. Replacing in place keeps the job inside the standard range and avoids permits. Relocating a sink is what pushes cost and timeline up.
The full cabinets & countertops scope runs $14,000 to $45,000 depending on size, material, and whether anything gets relocated. Call (855) 471-4163 for an exact quote – estimates are free and come in writing.
Every project carries the 730-Day Done Right Promise alongside the manufacturer warranties on cabinets and slabs. If it’s not done right, we make it right, in writing.
Get a Free Estimate for Cabinets & Countertops in Martinez
Every cabinets & countertops project in Martinez starts with a free on-site estimate. We come out, measure the room, look behind the cabinets, and hand you a written line-item quote with fixed pricing. We’ll tell you what needs a permit and what doesn’t. Calls are answered by a live person, 24/7. Call (855) 471-4163 to schedule your free estimate.
Written by the team at Groundwork Construction Co..












