A Groundwork company - serving Berkeley, CA
A living room with a wall of new windows and a sliding glass door

Windows & Doors Troubleshooting: Common Problems and How to Fix Them

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Berkeley

Last updated November 18, 2026

A new casement window over a kitchen sink
A new multi-panel patio door opening a kitchen to the patio
New painted shaker cabinets with an organized deep drawer
A remodeled hall bathroom with patterned floor tile and painted walls
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Windows & Doors Troubleshooting: Common Problems and How to Fix Them

If your door started sticking after last winter’s rains, the door didn’t change – your foundation or framing shifted, and the door is just the messenger. Planing the door fixes nothing. Most window and door problems homeowners call about have a root cause two steps upstream from the visible symptom: a sticking door usually isn’t a door problem, and a drafty window usually isn’t a glass problem. In Berkeley, where clay soils move with the wet and dry seasons and a lot of housing stock dates to the 1920s, that difference between symptom and cause is the whole ballgame. This guide walks you through diagnosing before you spend, so you fix the thing that’s actually wrong.

Call (855) 471-4163

Quick Answer

Windows and doors should be diagnosed by symptom before any repair is attempted: sticking usually means framing or foundation movement, drafts mean failed weatherstripping or a warped sash, fogged glass means a broken seal between panes, water intrusion usually enters at flashing and sill pans rather than the glass, and hardware failure is almost always a worn component you can identify by feel and sight. The fix follows the diagnosis – repair the door and you’ll be back in the same spot next season. Groundwork Construction Co. of Berkeley offers free estimates for any window or door issue across Berkeley.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Table of Contents

Diagnose First: Why the Symptom Is Rarely the Cause

We’ve pulled doors off houses in Berkeley’s Elmwood neighborhood that were planed twice and still dragged on the threshold, because the door was never the problem – the framing around the rough opening had twisted as the foundation settled. That’s the pattern most homeowners miss. A window or door is a rigid rectangle bolted into a structure that moves. When the structure moves, the rectangle gets racked, and the moving part tells you first.

The rule of thumb we use on every job: find out when the problem started and what else changed at the same time.

  1. Note the season the symptom appeared. Berkeley’s rainy winters and dry summers move expansive clay soils, so a door that swells and sticks in January and frees up in July is a moisture story, not a door story.
  2. Check whether the symptom is one-sided or even. A door that binds at the top corner opposite the hinges points to a racked frame. A door that binds evenly across the whole top points to a sagging header or settlement.
  3. Look for companion symptoms in the same room – drywall cracks radiating from window corners, a gap under the baseboard, a floor that feels springy. Windows and walls are a connected system.
  4. Rule out the cheap culprits before you call anyone: swollen wood (moisture), a loose hinge (screws stripped in soft jamb wood), or debris in the track of a slider.

We approach every window and door call as a full-scope diagnosis, because the fix for a racked opening is different construction work than the fix for a bad sash. For the larger structural picture, our team at Groundwork Construction Co. of Berkeley home can walk a lot line or a frame in a single visit. Two categories – water and framing – cause almost every “mystery” window and door problem we see. Separate those from cosmetics and the rest of this guide falls into place.

Sticking Doors and Windows: What the Messenger Is Telling You

A sticking door or window is a symptom, and diagnosing it correctly saves you from fixing the same problem twice. In Berkeley, where the housing stock includes a lot of 1920s bungalows and 1950s stucco boxes, the cause splits roughly three ways: seasonal wood movement, foundation or framing shift, and hardware or finish failure.

Here’s the symptom-to-cause tree we run through:

  • Sticks in wet months, frees in dry: moisture swelling in the wood sash or slab. Usually a finish problem (paint or sealer worn off at the bottom edge, where water wicks up). Refinishing the edges and sealing the bottom cap often solves it.
  • Binds at one corner, all year: a racked frame. The opening is no longer square, which usually traces to foundation movement or a twisted header. Planing makes it fit and hides the real issue.
  • Drags evenly on the threshold: settling of the wall or threshold, or a door that has sagged on its hinges. Check the top hinge gap – if it’s tight on the strike side and wide on the hinge side, the door has dropped.
  • Slider window or door won’t move: debris in the track, a failed roller, or the panel jumped the track. Look for a gap at the top of the panel.
  • Rubs only at the strike plate: the strike is misaligned or the hinges are loose. Tighten or replace the hinge screws with longer ones before you touch the door.

Two of those five are foundation-and-framing stories, and in Berkeley we see the corner-bind pattern most often in homes built on the flatlands near the bay, where the soil holds more moisture through the wet season. When a door binds at one corner all year and you can see cracks at the window corners in the same room, stop planing. Call a professional to look at the frame.

Drafts and Cold Spots: Where the Air Is Really Coming In

A drafty window usually isn’t a glass problem – it’s an air-seal problem, and the air almost always enters somewhere other than where you feel it. Air moves through gaps you can’t see from inside, hits your cheek or hand at the most exposed point, and you blame the window. We’ve found the real gap at the rough opening, behind the casing, on jobs where the homeowner had already priced new windows.

Before you consider replacement, run this check with a candle, a stick of incense, or your hand:

  1. Set a candle or incense near the suspect window on a windy day. Move it slowly along the perimeter – bottom sash, side jambs, top, and the meeting rail of a double-hung. Watch the flame or smoke for flicker.
  2. Check the weatherstripping with a dollar bill. Close the sash on the bill; if it slides out with no resistance, the weatherstripping has compressed or failed. On a double-hung, test both the meeting rail and the perimeter.
  3. Inspect the exterior. If you can see light around the frame from inside, that’s an air path. Gaps at the sill and at the rough opening are the usual suspects.
  4. Look for gaps around the lock and latch side of the door. A gap you can see light through is a gap that leaks air. Adjusting the strike plate or adding weatherstripping fixes it.

Most draft complaints in older Berkeley homes resolve with weatherstripping, adjustable sill shoes, and a tube of exterior sealant at the frame – not new windows. That matters: replacement windows are a real investment, and the companies that sell them rarely tell you a $30 strip of weatherstripping would have done the job. If you’re installing new units anyway, choosing a top brand like Andersen or Marvin is worth the money – matching the glass to the opening is the difference between a window that works for decades and one that’s a problem for years.

Fogged Double-Pane Glass: Defogging vs. Sash Replacement

Fogged glass between the panes is a failed seal. The spacer and sealant between the two panes have let in moisture, and the desiccant that normally absorbs it is saturated. That’s the whole diagnosis. The question is whether to defog, replace the sash, or replace the whole window.

Defogging companies drill small vents into the sealed unit and pump in dry air, then reseal. It works – sometimes – but understand what you’re buying: you’re paying to hide a leak, not to restore the insulating argon fill or the low-e coating performance. The unit will fog again when the seal fails further. In our experience, defogging is worth considering only when the fogging is mild, the panes are otherwise sound, and you’re selling the house soon or protecting a client relationship.

Here’s how we frame the decision:

  • Double-hung or casement with a removable sash: replacing just the insulated glass unit (IGU) or the sash is the right fix. It’s cheaper than a full window and keeps the original frame, which matters on older Berkeley homes where the frame contributes to the look.
  • Fixed window or a frame in poor condition: full unit replacement is the more honest call. A new IGU in a rotting frame is money down the drain.
  • Single-pane glass with a storm window: there’s no seal to fail, so if you see fogging it’s between the storm and the primary, and you’re looking at condensation from interior humidity. Vent the house before calling anyone.

One local note specific to Berkeley: fogging is more common on south- and west-facing windows that take the afternoon sun, because expansion and contraction cycles stress the perimeter seal faster. That’s a geographic detail the generic troubleshooting pages miss.

Water Intrusion: The Entry Points You’d Never Guess

Water rarely enters where it appears. A stain on the interior drywall below a window usually has nothing to do with the glass or sash – it’s the head flashing above, the corner joint of the rough opening, or the sill pan. This is the most expensive misdiagnosis on the list, because water travels and destroys framing and drywall from the inside out. In a place like Berkeley, where we get roughly 25 inches of rain concentrated between November and March, a bad flashing detail can do a decade of damage in a few seasons.

Work the water path in this order:

  1. Head flashing. The metal above the window that sheds water. If it’s missing, undersized, or sloped the wrong way, water runs behind the siding and into the rough opening. The stain appears below, so homeowners blame the window.
  2. Rough opening corners. The four corners of the opening, behind the casing, are where water wicks in. If you can see daylight or feel a draft from inside at the corner, water is entering there too.
  3. Sill pan and its drainage. The sill pan catches water that gets behind the sash and drains it out. If it’s sloped back toward the house or the weep holes are plugged, water pools against the frame and rots it from the bottom up.
  4. The window-siding seal. Sealant joints fail every 5 to 7 years – the caulk bead is the last line of defense, not the first. Standing water at the base of a window or door should send you straight to the exterior sill.

Look at the wood at the base of the window from outside. If it’s soft when you press a screwdriver into it, the water has been entering for years and the fix is structural, not cosmetic. That’s the moment to call a professional – the repair is more than a window job, and it involves carpentry and flashing knowledge that a handyman usually doesn’t carry.

Hardware Failure: What Wears Out and What You Can Swap

Most hardware failures are simple wear, and you can identify them by feel and sight. The four components that fail first are the lock or latch, the hinges or pivots, the rollers, and the weatherstripping – and two of the four are usually a straightforward part swap.

Here’s how to sort it:

  • Door lock won’t latch: the strike plate is misaligned. Close the door slowly and watch where the bolt meets the plate. If it hits high or low, loosen the plate’s screws and shift it. That’s a 15-minute fix.
  • Door lock feels loose or wobbly: the lock cylinder or mechanism is worn. On older mortise locks, parts are replaceable. On modern tubular locksets, you replace the whole mechanism – a standard item you can find at a local hardware store.
  • Door sags at the knob side: a hinge has pulled loose or the top hinge screws are stripped. Replace the screws with 3-inch wood screws that bite into the stud behind the jamb. If the jamb is too chewed up for longer screws, the hinge needs to be reset – a carpenter’s job.
  • Slider sticks or grinds: the rollers or track. Clean the track of grit and inspect the rollers; on most sliders the rollers are replaceable without removing the panel.
  • Handle or operator on a casement breaks: these are unit-specific. Match the brand and model – Andersen, Pella, and Marvin all sell replacement operators, but off-brand matches usually don’t fit.

Hardware is where homeowners win the most DIY repairs. If the symptom is “one part that won’t move like it used to,” you’re probably in replaceable-parts territory. If the symptom is the whole door or window not sitting in its opening the way it should, that’s not hardware.

Cosmetic Wear or Structural Warning: A Field Test with Tools You Own

You can tell cosmetic wear from a structural warning with a few tools you already have: a level (or the level app on your phone), a flashlight, a screwdriver, and a straightedge. The goal is to separate “the finish wore out” from “the building moved.” Those two have entirely different price tags, and mistaking one for the other is how homeowners spend $8,000 solving a $200 problem.

Run the tests:

  1. The level test. Hold the level vertically against the door jamb and horizontally across the header. If the jamb leans or the header sags, the structure moved. A door that’s out of square by a quarter inch or more at the top-opposite-hinge corner is a framing symptom, not a finish symptom.
  2. The screwdriver test. Push the tip of a screwdriver gently into the wood at the bottom of the window sill and at the door threshold. Soft, spongy, or crumbling wood means moisture damage. Keep poking gently – the goal is the depth of the soft spot, not a hole.
  3. The crack map. A single hairline crack in the paint is cosmetic. A crack that runs consistently wider toward the window corner, or a set of cracks that fan out from a corner, points to movement at the opening. Note the direction: cracks radiate toward the source of the movement.
  4. The stick test. Open and close the window or door slowly and listen. A soft tick is hardware. A hard scrape or a bang is the frame or the wall.
  5. The light test. At night, turn on a light outside and look at the window frame from a dark room. Light means a gap, and a gap that lets light in also lets water and air in. Look at the corners specifically.

If the level and crack map both say “the building moved,” stop. A cosmetic repair will not hold, and you’ll be back at it in a year. That’s when it’s time to have someone look at the framing and the foundation – the work goes beyond window and door repair. When the tests come back clean and it’s just worn finish, you can fix it with a weekend and a tube of caulk.

When a DIY Fix Will Hold vs. When It Masks a Bigger Bill

The line between “I can fix that” and “I’ll make it worse” is narrower than most guides admit, and we’d rather tell you where it is than have you find out the expensive way. Some of this you can absolutely do. Some of it you shouldn’t.

Fixes that hold when you do them

  • Weatherstripping and door sweeps on a functioning frame. Replacing weatherstripping and adding a door sweep is a real fix that works, as long as the frame itself is square and sound.
  • Strike plate and hinge adjustment when the jamb is solid. Shifting a strike plate or replacing short hinge screws with longer ones fixes the sag or latch misalignment permanently if the wood around them is sound.
  • Caulk and sealant at the exterior. Recaulking the window and door perimeter to keep water and air out is maintenance, not repair, and it’s the single best low-effort defense.

Fixes that mask a bigger problem

  • Planing a sticking door that binds at a corner. The door will fit this year and stick worse next year, because the frame is still moving. You’ve shaved off a visible warning.
  • Resealing fogged glass instead of replacing the unit. You’re hiding a failed seal. The fog returns.
  • Adding a thicker door stop or shimming a frame that’s out of square. If the opening is racked, shimming just changes which part rubs next.
  • Putting a bead of silicone over a water intrusion point without fixing the flashing behind it. The water will find a new path, usually one you can’t see until the drywall is wet.

The general rule: if the problem is a removable part (hardware, weatherstripping, finish), a homeowner repair usually holds. If the problem is the opening itself – the frame, the flashing, the sill – the fix lives behind the surface, and a surface repair is camouflage. This matters especially in Berkeley homes where the overall structure – not just the window – decides the outcome. A home addition or structural change often shifts those openings, and that’s when the answer is a team that handles frame-to-finish work, like Home Additions & ADU in Berkeley. And if you’re planning exterior work that runs up against your window frames or a gate that won’t swing right, our Fence Installation in Berkeley and Driveway & Pavers in Berkeley pages cover the site work that ties into those structures.

Common Mistakes to Avoid

  • Fixing the messenger instead of the message. Planing a sticking door or shimming a sash before you’ve checked the frame or foundation puts a permanent patch over a moving problem. It fits for one season.
  • Buying replacement windows before checking the weatherstripping. Most drafts in older Berkeley homes are air-seal problems, and a few door sweeps and a tube of caulk will fix them for the price of dinner. New windows don’t seal a rough opening that’s already leaking.
  • Paying a defogger when the sash is removable. Defogging is a stopgap; a new IGU or sash in a sound frame is the honest repair. Ask which one the company is doing before you write a check.
  • Chasing a water stain below the window when the water comes from above. Look up at the head flashing and the exterior corner joints first. The stain is the destination, not the leak.
  • Ignoring soft wood at the base of a door or window. In Berkeley, the rainy season exposes failed sill pans, and soft wood means the water has been entering for years. Caulking over soft wood locks the moisture in.
  • Using the wrong hardware for the brand. Casement operators and multi-point lock mechanisms are unit-specific. Matching Andersen, Pella, or Marvin parts at the model level is the difference between a fit and a return.
  • Waiting for the “right week” to call. A door that sticks all year won’t fix itself, and the fix grows more expensive the longer the framing moves. Finding the cause early is cheaper than a larger structural repair later.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

When to Call a Professional

Call a professional when the symptom passes your field tests: a door or window that binds at a corner all year, cracks that fan out from an opening, soft wood at the sill or threshold, water intrusion that returns after you’ve caulked, or a frame that’s out of square by more than a quarter inch. Those are structural or flashing repairs, and they need carpentry and building knowledge that a part swap can’t cover. Our technicians have up to 12 years of experience diagnosing exactly these cases, we’ve been in business since 2014, and we approach every job as a full-scope repair from the frame outward. Groundwork Construction Co. of Berkeley offers free estimates in Berkeley – call (855) 471-4163, and a live person will pick up, because our phone is answered by a real human, 24/7.

Frequently Asked Questions

A new front entry door with glass sidelights

The Bottom Line

Diagnose before you spend. The window and door symptoms that fill home repair lists – sticking, drafts, fogging, water intrusion, hardware failure – each have a specific cause, and the fix is different for each. In Berkeley’s wet winters and older housing stock, the most expensive misdiagnosis is treating a movement or flashing problem as a finish problem. Find the cause with a few simple tests, match the repair to the cause, and call a professional when the frame, flashing, or sill is involved. Our team has seen these patterns on hundreds of Berkeley homes, we back every repair with the 730-Day Done Right Promise – if it’s not done right, we make it right – and we price every job upfront, so the number you see is the number you pay. Call (855) 471-4163 for a free estimate across Berkeley, and let’s get your windows and doors working the way they’re supposed to.

Written by the team at Groundwork Construction Co. of Berkeley.

Getting started with Groundwork in Berkeley

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Berkeley team

A local vetted partner works across Berkeley and the towns around it, to the same written standard as every Groundwork job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Berkeley? Licensed & insured · free written estimates
Call (855) 471-4163
Local Service Coverage

Request a Free Estimate in Berkeley

Tell us what you need - Groundwork Construction Co. of Berkeley responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch