







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Ashland, CA: What the Job Really Involves
Cabinets & countertops in Ashland, CA typically run $14,000 – $45,000 as part of a kitchen remodel, and the cabinet-and-counter portion alone usually lands between $6,000 and $18,500 depending on layout and material grade. Plan on 3 – 5 weeks from demo to final caulk if the footprint stays put; add 4 – 6 weeks if you’re relocating plumbing or electrical and need a county permit. Call (855) 471-4163 and we’ll walk your kitchen and give you a written line-item number.
How We Run a Cabinet & Countertop Job, Stage by Stage

Most contractors describe this work as “demo, install, done.” It isn’t. Here’s what actually happens, in order, with real durations.
Stage 1: Measure and order (day 1, then a 3 – 6 week lead time)
We template the actual walls, not the drawing. In Ashland’s older ranch homes, walls are rarely square and floors rarely level, so every cabinet run gets scribed to the real surface. You’ll make your material picks here: door style, finish, countertop slab or laminate, edge profile. That’s the decision that sets your lead time. Stock cabinets arrive in about a week; semi-custom runs 3 – 4 weeks; full custom and most natural stone slabs run 5 – 6 weeks.
Stage 2: Demo and prep (1 – 2 days)
Old cabinets and counters come out, appliances get disconnected, and we open the wall where needed to check what’s behind it. This is where surprises live in mid-century Ashland houses: undersized wiring, galvanized supply lines, a previous owner’s shortcut. You’ll get a call the same day if we find something that changes the scope, with the cost before we touch it.
Stage 3: Rough-in and inspection (2 – 4 days, permit-dependent)
If we’re moving a sink, adding a dishwasher circuit, or shifting a range, the rough plumbing and electrical get done and inspected before anything closes up. In unincorporated Ashland that inspection is scheduled through Alameda County, not a city counter, so the queue is its own thing. We handle the scheduling and meet the inspector on site.
Stage 4: Cabinet set and counter template (2 – 3 days, then a 5 – 10 day fabrication window)
Bases go in first, leveled and shimmed, then uppers. Once the base cabinets are locked in place, the countertop fabricator templates the actual installed cabinets. Stone and quartz get cut off-site; laminate is often cut to the template and installed in a single later visit. You don’t need to be home for either, but we’ll send photos.
Stage 5: Counter install, sink, and finish (1 – 2 days)
Countertop goes down, sink and faucet get set, cabinet hardware gets drilled and mounted, and we caulk the seams. Final walkthrough is yours: open every drawer, check every door alignment, run the faucet. Anything on the punch list gets fixed before we call the job closed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Most of the decisions on this job come down to five categories. Here’s the honest trade-off on each.
- Cabinet box construction: Stock cabinets (particleboard box, stapled) start around $4,000 for a small kitchen and hold up fine in a dry interior. Plywood-box semi-custom runs $8,000 – $13,000 and lasts decades with normal use. KraftMaid sits in that semi-custom tier and is a solid middle choice when you want a real wood box without full custom pricing.
- Door and drawer fronts: Thermofoil is the cheapest and peels at the edges over time, especially near a dishwasher. Painted MDF looks clean and modern but chips at corners and can be touched up. Solid wood and wood-veneer hold up best and cost the most.
- Countertop material: Laminate is the value play at $2,000 – $3,500 for a typical run and handles a normal household fine. Quartz is the current default at $4,000 – $6,500: non-porous, no sealing, consistent color. Natural granite costs similar and looks unique but needs periodic sealing. Cambria is a quartz brand worth asking about if you want a specific colorway guaranteed.
- Layout changes: Keeping the sink, range, and fridge where they are saves real money. Moving any of them means new supply and drain lines, a new circuit, and a permit – usually $1,500 – $4,000 in added cost and several extra weeks.
- Edge profile and backsplash height: A standard eased edge is included on most slabs. Ogee, bevel, and waterfall edges add cost. A 4-inch splash is standard; a full-height backsplash is a separate scope we’d quote alongside this job.
You don’t need to pick all of this before we show up. Bring photos of kitchens you like and a rough budget, and we’ll tell you which combination actually fits it.
What Cabinets & Countertops Costs in Ashland, CA

Expect $14,000 – $45,000 for the full kitchen with cabinets and countertops included, or $6,000 – $18,500 if you’re replacing just the cabinet-and-counter package. Here’s how the pieces break down.
| Line item | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Island install (if included) | $3,000 – $10,000 |
| Full kitchen w/ cabinets & counters | $14,000 – $45,000 |
Five things push a job toward the high end. Kitchen size is the biggest driver: a 10×10 galley is a different number than a 15×20 open plan. Existing condition matters a lot in Ashland’s mid-century stock, where we regularly find out-of-level floors and walls that need furring before cabinets can hang. Relocating plumbing or electrical adds both cost and permit scope. Material grade is the one you control most: stock-and-laminate versus semi-custom-and-quartz is easily a $10,000 swing. Permit scope adds time and fees whenever the work touches mechanical, electrical, or plumbing.
A written estimate from us covers demo, disposal, cabinet set, counter template and install, sink install, and cleanup. It usually does not cover appliance purchase, structural changes, or full-height backsplash tile, and any of those we’d quote separately and clearly.
See the difference
Before
After
Before
After
Before
AfterWhat Ashland Homes Specifically Do to This Job
Ashland sits inside unincorporated Alameda County, so a kitchen permit here goes through the County Building Department rather than a city counter – a different plan-check queue and a different set of inspectors than a neighbor one street over in Hayward or San Leandro deals with. We’re used to that rhythm and we build the inspection windows into the schedule from day one, so you’re not stuck waiting on a callback.
The housing stock shapes the work too. Ashland is dominated by mid-century single-family ranches and small stucco-and-wood-frame duplexes from roughly the 1940s into the 1970s, many with early Romex wiring, detached garages, and the occasional unpermitted addition from a previous owner. That last one is worth knowing about before demo: if a wall turns out to be a later addition with no permit on record, it changes how we handle the electrical. Older homes near the Hayward Fault also come with foundation considerations we check during the estimate, because a cabinet run sitting on an out-of-level slab shows every gap at the toe kick. Mention Ashland cabinets when you call and we’ll bring a level and a flashlight to the walkthrough.
Serving Ashland, CA – Our Local Coverage Area
We serve Ashland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Ashland

Three to five weeks from demo to final walk, assuming the layout stays put and cabinets are semi-custom. The single biggest delay is lead time on the cabinets themselves, which is why we order before demo starts. Add 4 – 6 weeks if you’re relocating plumbing or electrical and need county inspection. Call (855) 471-4163 for a schedule based on your actual picks.
Not if you’re only replacing like-for-like cabinets and counters. You do need one when the work moves plumbing, adds or relocates electrical, or changes the structural layout. Because Ashland is unincorporated, that permit runs through Alameda County, and we pull it and meet the inspector on site. Call (855) 471-4163 and we’ll tell you up front whether your job triggers one.
Yes, and it’s usually the smartest move if the current layout works for you. Keeping the sink, range, and fridge in place trims $1,500 – $4,000 off the job and cuts several weeks off the schedule. If the layout doesn’t work, we’ll tell you honestly whether the change is worth the added cost before you commit.
Most Ashland cabinet-and-counter packages run $6,000 – $18,500, with the full kitchen including everything at $14,000 – $45,000. The difference between the ends is mostly kitchen size, material grade, and whether we have to fix what’s underneath. Call (855) 471-4163 for an exact written quote – the estimate is free and the price in writing is the price you pay.
Every cabinet and countertop project we install is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s on top of manufacturer warranties on the cabinets and slabs themselves, which we walk you through at the final walkthrough.
Get a Free Cabinets & Countertops Estimate in Ashland
Call (855) 471-4163 for a free on-site estimate. You’ll get a live person on the phone, a walkthrough where we measure the real walls and check what’s behind them, and a written line-item quote with no change orders and no surprises. Finishing the project brings the 0% financing for 18 months and $1,000 off projects over $10,000 into play. Free estimate, clear number, backed in writing.
Written by the team at Groundwork Construction Co.












