







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Pleasant Hill, CA: What It Takes and What It Costs
Door installation in Pleasant Hill typically runs $650 to $3,200 per opening, depending on the door type, the frame condition, and whether an exterior opening needs a permit. Most interior door swaps are a one-day job; an exterior entry door with trim and hardware takes two to three days. Call (855) 471-4163 to schedule a free on-site estimate. We measure the opening, check the existing frame, and give you a written line-item quote before anything is ordered.
How we run a door installation from first measurement to final adjustment

Doors fail for boring reasons: a frame out of square by a quarter inch, a threshold set on a slab that’s moved since 1962, or a strike plate that never lined up. Our sequence is built to catch those before the door goes in.
Stage 1: Measure and assess the opening (day 1, about an hour)
We measure the rough opening in three places – top, middle, bottom – and check plumb and level on the frame. On an exterior door we look at the sill and the flashing detail. You decide the door style and material at this stage, and we tell you honestly whether the existing frame can stay or has to come out. On Pleasant Hill’s older ranch homes, that call comes down to whether the header and jack studs are sound.
Stage 2: Order and confirm (5 to 15 business days)
Standard sizes ship fast. A prehung Therma-Tru entry door in a common width usually lands inside two weeks; a custom-width or non-standard sidelight configuration takes longer. You’ll confirm handing (which way it swings), hardware finish, and glass options during this window. We don’t order until you sign off on the spec sheet.
Stage 3: Demo and prep (half a day)
We pull the old door and trim, check the opening for rot, and shore up anything soft. On exterior openings we inspect the flashing and sill pan – this is where water intrusion shows up first. Interior openings get squared and shimmed as needed. Any rotted framing gets replaced before the new unit goes in, not patched around.
Stage 4: Set, shim, and seal (half a day)
The new door goes in plumb, level, and square, shimmed at the hinge side first. We check the reveal gap around all four sides – it should be even, roughly 3/16 inch, or you’ll get a door that drags in summer. Exterior units get low-expansion foam, a proper sill seal, and a backer rod plus sealant around the perimeter.
Stage 5: Hardware, trim, and final adjustment (two to three hours)
We hang the hardware, set the strike plate, and adjust the hinges until the door latches with a light push. Trim goes back on and gets caulked and painted to match. You walk the job with us and test the door yourself before we pack up. If anything’s off, we fix it on the spot.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The door options you’ll choose between
Most Pleasant Hill homeowners are picking between three or four real options per opening. Here’s the honest trade-off on each.
- Steel entry doors: strong, secure, and the best value for a front door – usually $900 to $1,800 installed. They dent under impact, though, and dents don’t come out. Good for a side or back entry where security matters more than looks.
- Fiberglass entry doors (Therma-Tru is the name most people know): $1,400 to $3,200 installed. They won’t dent, rot, or warp, they hold paint and stain well, and they can mimic wood grain closely. This is what we install most often on front entries in Pleasant Hill.
- Wood entry doors: $2,000 to $5,000+ installed for solid or engineered wood. Beautiful, and they need refinishing every few years in our summer sun. Suit a covered porch better than a fully exposed west-facing wall.
- Interior doors (hollow-core or solid-core): $250 to $650 installed for hollow-core, $450 to $900 for solid-core. Hollow-core is fine for closets and spare rooms; solid-core cuts noise between bedrooms and feels better in the hand. Worth the upgrade on bedroom doors off a shared hall.
- Sliding and French door units: these overlap with our wider windows & doors work and we scope them here when you’re replacing the whole opening, not just the slab.
- Security hardware and openers: a solid deadbolt, reinforced strike plate, and – on garage or gate entries – a rolling-code remote matter as much as the door. We spec these with you on the estimate.
What door installation costs in Pleasant Hill, CA

Plan on $650 to $3,200 per door installed, and $400 to $800 if you’re only swapping an interior slab into an existing frame. Here’s what typically moves you toward the low or high end:
- Door type and material: a hollow-core interior door sits near $250 to $650; a fiberglass entry with sidelights runs $2,000 to $3,200.
- Frame condition: sound frame, quick job. Rotted sill, out-of-square opening, or a header that needs work adds $300 to $900.
- Exterior vs. interior: exterior doors carry flashing, sealing, and often a permit; interior swaps usually don’t.
- Hardware grade: builder-grade knob versus a keyed lever set, smart lock, or reinforced deadbolt changes the number by $100 to $500.
- Permit scope: a like-for-like exterior door swap usually doesn’t need one; enlarging an opening or changing the header does, and that pulls in inspection and framing.
A written estimate from us lists the door unit, the hardware, labor, disposal, and any framing or flashing repair, plus whether a permit is required. It won’t include painting beyond touch-up, or repairs to drywall and siding beyond the immediate opening – those get quoted separately if they come up. The number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Pleasant Hill homes specifically do to this job
Most of 94523 is 1950s to 1970s single-story ranchers and split-levels, plus 1960s and 80s condo and townhome clusters near the downtown and the freeway. That stock shapes the work. In the Gregory Gardens tracts, we regularly find door frames that have settled with the slab, so the opening is out of square by a half inch or more – you can’t just drop a prehung door in without adjusting the frame. In the townhome clusters, the tight clearances and shared walls mean entry doors need to swing clean and latch firmly into a fire-rated frame, and building or HOA rules on door color and glass are real. The inland Diablo Valley heat also does a number on wood doors on west-facing walls, which is why fiberglass gets the nod here more often than in cooler coastal towns.
Because Pleasant Hill is a built-out, almost entirely post-WWII suburb, this is remodel work, not new construction, and door openings often sit near original aluminum wiring or galvanized plumbing. It rarely surfaces on a simple door swap, but if the job turns into enlarging an opening or a header change, the City’s review can pull in more than you planned. That’s also where homeowners often pair this with Cabinets & Countertops in Pleasant Hill during a kitchen pass, or a Garage Conversion ADU in Pleasant Hill where new entries and garage doors are part of the build. Because it’s part of a full Windows & Doors in Pleasant Hill scope, we’ll flag those overlaps early when we cover Pleasant Hill.
Serving Pleasant Hill, CA – Our Local Coverage Area
We serve Pleasant Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: door installation in Pleasant Hill

An interior door swap is usually done in two to four hours, and a prehung interior takes a single day. An exterior entry door typically takes two to three days once the unit arrives, including demo, framing fixes, sealing, and trim. Order lead time runs five to fifteen business days depending on the door.
A like-for-like replacement of an exterior door in the same opening usually doesn’t require a permit, while enlarging an opening or changing the header does. We tell you up front which side of that line your job falls on, and if a permit is needed, we pull it and see it through inspection.
Yes, in most cases a straight door replacement touches neither – the work stays inside the existing opening. If the frame is rotten or out of square enough that the opening has to change, that’s where framing comes in, and we scope it before we start rather than mid-job.
Expect $650 to $3,200 per door installed. Interior slabs run $400 to $800, fiberglass entry doors run $1,400 to $3,200, and frame or header repairs add $300 to $900. Call (855) 471-4163 for an exact quote – estimates are free.
Our workmanship is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. The door unit and hardware also carry their own manufacturer warranties, and we hand you those documents at the walkthrough.
Get a free door installation estimate in Pleasant Hill
Call (855) 471-4163 to schedule a free on-site estimate for door installation in Pleasant Hill. On the call, we’ll ask what kind of doors you’re replacing and when you’d like the work done, then book a time to measure the openings and put a written line-item quote in your hands. No pressure, no vague numbers – just a clear scope and a fixed price.
Written by the team at Groundwork Construction Co.












